Giving Back - Who We Donated to This Year

A tradition I started three years ago was to donate a percentage of profits from Birch Landing Home at year-end to Charity.  I’m so happy to say that this year we were able to help support the Myasthenia Gravis Foundation of America in addition to our donation to Susan G. Komen for the Cure.

Thank you so much for all your support for my Etsy shop and blog this past year, I hope to continue to grow them and be able to give back more each year in return. 

Happy 2020! Goals for the New Year

Happy New Year! Can’t believe a new year is here already. Overall 2019 was great and here’s hoping 2020 is even better and more productive! This morning we went out to breakfast with family and then the kids and I went on a short snowshoe hike, which was a fun start to the New Year!

I have several personal and professional goals for 2020 and thought I’d share a few of them:

• Learn to ski. Even though I’m a life-long New Englander, we didn’t grow up doing winter sports so I never learned. Now that our kids are learning (and doing amazing) I need to catch up ASAP!

• Use less plastic. We already make an effort to recycle as much as possible and not be wasteful but watching the documentary “Broken: Recycling Sham” on Netflix was eye-opening. So much of what people put in the recycling bin ends up in landfills or the ocean in the end, as a lot of plastic is too difficult or expensive to recycle and it’s sorted out and discarded. (PS - if you haven’t watched this documentary yet, I highly recommend it!)

• Purge, purge, purge. Every year I have a renewed sense of motivation to go through our house and purge un-needed items. It feels so good to get rid of things you don’t need and make your house a little “lighter” and cleaner. After the holidays our house feels too heavy again, so it’ll be good to go through toys, books, etc and reevaluate what is getting used, what has been outgrown, and what is no longer needed.

• Post more regularly. This last year I’ve just been feeling busy with the day-to-day… and the blog wasn’t updated as much as it should have been. I want to be better about sharing DIY projects and our day trips around New England, and hopefully 2020 will be much more consistent and productive!

Do you have any goals for 2020? I would love to hear them!

First Day Hike - 2020!

Things I Wish I Knew Before my C-Section

I thought I knew what to expect going into our planned c-section. After all, I read all the books and thought I knew all the steps and heard all the stories - but I soon found out I didn’t feel prepared at all and it was VERY different than I expected. Our first baby we had naturally - in fact I was able to hypnobirth her pain-free (and drug free!) and remain calm, cool, and collected (you can read more about that in my previous post HERE). However our second baby was wedged in breech and would not turn so we opted for a planned c-section. The c-section was SUCH a different experience, with a lot of surprises (for me anyways)… | This post contains affiliate links |

Disclaimer: This post shares my personal experiences and realizations and is not medical advice. Please always check with your doctors for the best advice/recommendations and know that your experiences can be very different from mine.

Things I Wish I Knew Before my C-Section

The IV Fluids will Make You Puffy.
Prior to going into the OR, they will give you IV fluids as part of your prep to make sure you’re well hydrated. For me, they made me quite puffy (thanks water retention), especially around my face and neck. Seeing myself in photos after I was surprised how puffy and swollen I looked. (I also could not take my wedding rings off and thankfully they didn’t make me as my hands somehow didn’t swell.)

The Operating Room (OR) is Intensely White.
To be frank, this totally freaked me out. Walking down a normal hallway with decor and warm lighting into a very bright, very starkly white room was absolutely jarring. It kind of felt like that scene from the original Willy Wonka when they try to send Mike Teavee through Wonka Vision. Everything was just so white and so harsh-looking. I understand the need for it (for cleanliness and sterilization purposes) but if you’re not expecting it, it can kind of set you on edge.

You Can Feel So Helpless and Not in Control.
Inserting the epidural was thankfully very fast and not bad, but once they laid me down and it kicked in I felt so helpless. I HATED not being able to feel or move anything from my chest down. I felt groggy, extremely emotional (thanks hormones), and totally helpless.

You May Feel Non-Pain Sensations After The Epidural.
Right before they got started, they pulled a piece of tape off my stomach (I think they were repositioning the drape), but I could feel the tape pulling off. This scared me and I spoke up, but they assured me it was okay. Apparently epidurals numb your ability to feel pain, but sometimes you can feel other sensations (like tape being pulled off).

You’ll Feel Like You’re Being Dissected by Aliens.
Okay, so this sounds a little dramatic but it was the most accurate description for me. Even though everything was going well, the doctors and assistants were all cheery, and everything was perfect and professional - I still couldn’t help but feel like I was in some sci-fi movie in a stark white spaceship, being dissected while I was still alive.

They Squeeze the Baby Out.
Somehow I was not aware of this… they make the incision for the baby to come out, but then they push (and push hard) down on your uterus/upper abdomen/lower ribs so the baby starts to squeeze out of the incision, then they help guide and pull the baby out. Our baby was really wedged in there, so the assist had to jump and put all her weight on me to get the baby to come out.

The Whole Procedure is FAST.
The doctors and team were very skilled and experienced and very fast. Our doula had warned us it would feel like everything was urgent and rushed but that’s just how they go (and she said during an emergency c-section they can go even quicker which is incredible). From the time we walked into the OR to the time I was being stitched up it was maybe 20 mins tops. They were fast, efficient, and experts at this.

Those Moments After Delivery Can Feel so Lonely.
Immediately after delivery they showed me the baby but then she went over to a warming table to get a quick exam and her vitals checked. She was totally fine but it’s pretty standard for baby to be checked over nearby while they finish working on you and sewing you up. My husband understandably went over to stand with the new baby and watch her, and even though he and the baby were only feet away it felt like miles. I was emotional, numb from the chest down, and felt abandoned (dramatic, huh?)… I was crying and everyone was busy (taking care of me and baby) but I just felt so alone.

You Might Have a Catheter Longer Than You Think.
They leave the catheter in until the epidural wears off and you feel strong enough to get up which was quite a while for me. And even once they do take it out, be aware that sometimes your bladder is the last thing to “wake up” - it took a long time for me to be able to pee on my own.

You’ll Get an IV Port for Most of Your Stay.
Even though I was done with the IV right after the c-section procedure, they tend to leave the IV port (in my case it was in the side of my wrist) in for the remainder of your stay in the unlikely event you need an IV for an infection, dehydration, medication, etc. And every day they need to flush it with saline to make sure it stays clear and clean… the flushing feels very weird and extremely uncomfortable which I was not expecting.

Getting the Staples Out Surprisingly Didn’t Hurt (Whew!)
I was dreading the day when they removed the staples from my incision. I thought for sure it was going to hurt or pull or there would be blood but none of those things were true. For me it didn’t hurt at all thankfully and the doctor removed them quickly and easily.

You Will Regret Standing Too Long.
For me, especially in those early days, standing or walking for just a few minutes was HARD. I would be standing - feeling fine and great - and then all at once I would suddenly feel warm and get a deep burning sensation around my incision and I would have to immediately sit down because I felt like I was going to pass out.

You Will Still Have Postpartum Bleeding.

Even though they “clean you out” during the c-section there will still be residual material that will have to run it’s course and be shed just like from a normal delivery. So get those Depends ready and be prepared to still deal with that. For me, it definitely wasn't as heavy but it still lasted several weeks.

Your Incision Can Have No Feeling For a Long Time.
For weeks my incision felt numb or very “weird” to the touch… like I was touching it through a thick quilt even tough I was touching my own skin. Apparently sometimes it takes awhile for the nerves to reconnect so that numb feeling around the incision can linger for quite a long time. It slowly wore off though and I regained my feeling there over time.

You Will Be Defensive of Your Incision for Months.
My incision healed beautifully and well but even months after the surgery I was very subconsciously protective of it. Even much later when I picked up my kids, if they pressed their foot on my incision I thought for sure they were going to pull it apart. It was all in my head though.

Overall, my c-section and recovery were all textbook and went perfectly without any real setbacks thankfully. Still, in the moment and as I recovered I realized I wasn’t as mentally prepared for the c-section as I had thought. Just because a mama goes through a c-section and not a vaginal delivery doesn’t make it feel any less emotional. It definitely helps being prepared and asking questions ahead of time so you (hopefully) won’t have as many surprises.

Best of luck, Mamas!!

---

Related Post:

• “Pain-Free Childbirth: My Hypnobirthing Experience”

• Important Tips on Creating Your Baby Registry

• Our Top Baby Registry Must-Haves

---

Disclaimer: This post shares my personal experiences and realizations and is not medical advice. Please always check with your doctors for the best advice/recommendations and know that your experiences can be very different from mine.

How we Turned a Coat Closet into a Functional, Organized Pantry

Our kitchen was lacking a pantry, so we often kept canned goods and backstock on a shelving unit at the foot of our stairs in the basement. But because half of our food and snacks were downstairs and half were upstairs it made for frequent mistakes when buying groceries… it was hard to visualize exactly what we had and where so we often ended up overbuying certain things and forgetting to buy others. Tired of wasting money, food, and time running up and down the stairs I decided to make over a coat closet into a functional pantry. | This post contains affiliate links |

Now while this coat closet (pictured below) was pretty jammed full, it was very underutilized. It’s where we kept our off-season coats, hats, and boots as well as some hiking gear and my daughters’ Art Cart - most things we did not need to use daily, or often at all. My solution to this was to relocate all these items to our basement - I hung a closet rod under the basement stairs and moved all our off-season clothing and gear to this new space where it was still easily accessible but out of the way.

| Adjustable Closet Rod I used for under the basement stairs |

Coat Closet - BEFORE

Relocated off-season gear to basement

The next step was to pull out the old wire shelf and closet rod system, patch the holes, and repaint the inside of the closet. Thankfully I already had spackle and some leftover white paint so I was able to get the closet to a clean slate easily and it didn’t cost a dime.

Now for the fun part! I got to decide how many shelves I wanted and the spacing, so I laid it out with painters tape to play with how I wanted it before I made a final decision. For our setup I decided on four shelves starting at about waist-height. I wanted to leave the bottom open to accommodate the dog food bin, the Art Cart, step stool, etc. Then I screwed in 1x3 inch “runners” that would support the shelves along the back wall. I used a stud finder to make sure I was screwing the runners into studs and a level to make sure everything was square.

Then I added runners to one side of the closet next, following the same routine - but with these pieces I had pre-drilled pocket holes with our Kreg Jig first so it would make for a clean and secure joint in the corners.

Before installing the runners on the opposite side of the closet, it’s wise to keep in mind how you will be able to maneuver the shelf boards in once all the runners are in place (it would be very difficult to get the top shelf in with all the runners installed, for example). So before installing the opposite side’s runners I slipped some of the trickier shelf boards into place first (I used 1x12”s cut to length for the shelves) before I finished screwing in all the side runners.

I secured the shelves into place with some finishing nails, then taped off the shelves and runners to get ready for paint. I used primer and then several coats of white semi-gloss paint since it’s a little easier to wipe down and keep clean.

I just love how farmhouse and “Shaker” the exposed rails on the sides look and I wanted to play it up. Once the paint was dry I added some functional hooks to hang aprons, lunchboxes, etc on the side rails.

| Skip Hop Fox Lunchbox | Similar Style White Metal Farmhouse Basket | OXO POP Containers |

And now the project is complete! I am so happy with how it turned out and it’s wonderful to have everything in one place. I can see this project saving us money on groceries in the long run now as everything will be in one place now and we’ll be less apt to waste food.

Eventually, I would love to replace the closet door with a fun screen door and get some more glass jars and baskets for a cleaner looking pantry - but all in good time.

| Similar Clear Plastic Storage Bins | Dog Food Container (on the floor, just out of the picture) |

| Similar White Metal Craft Cart | Small Wire Baskets | Similar Clear Plastic Storage Bins |

| Flour, etc. jars were made using Cracker Jars with custom vinyl labels I made on my Cricut | Vintage Pie Tins |

Over this past winter I added a few simple add-on organizers to our pantry to maximize the space and love how functional they are. Here they are below (and please excuse the glimpses of clutter in the pantry… as it now holds extra groceries and our family board games too - because, real life):

Additional Storage for the Walls

| Similar Wire Wall Basket | Mason Jars to store Trail Mix |

Under-Shelf Storage

| Wire Under-Shelf Basket - Perfect for Storing Potatoes! |

Decal for Pantry Door

It turns out our door is an odd size and in order to get a screen door for it we would have to custom order one (at a cost of about $300+! Yikes). So instead I decided to cut a custom vinyl label to stick to the door to make it more finished. I could have designed my own but I found a design I really liked on Etsy and bought the digital design file. After purchasing the design file, I used my Cricut and 651 Permanent Vinyl to make the label and then transferred it to the door. In hindsight I probably should have made it slightly smaller, but overall I love how it came out and how budget-friendly it was since I already owned a Cricut Machine and the vinyl.

| Pantry Digitial Design File | Cricut Machine | 651 Permanent Vinyl in Matte Black |

Back of Door Organizer

Finally, we decided to add a ClosetMaid Adjustable Organizer to the back of the pantry door to fully utilize the space. It was very simple to install and I am impressed with how sturdy it is once it's assembled and screwed in. We used the lower baskets for foil, parchement paper, ziplocks, silicone bowl covers, etc. The middle baskets we designated for frequently used canned goods, smoothie mix-ins, as well as salad fixings and rice cakes. Finally on the top two baskets we put convenience foods that we rarely use since I'm so short. Note: If you have a hollow-core door, you might want to use a specialty set of anchors/screws to attach it to the door for stability, rather than just screw into the door with regular screws.

| ClosetMaid Adjustable Organizer (18 inch) | True Nature Silicone Food Covers |

Stackable Canned Goods Organizer

Another later addition to our pantry organization are these amazing stackable can racks for organizing canned goods. Before I had quite a few canned goods just sitting on the floor of the pantry and in a separate kitchen cupboard, but I never could see everything at once and often cans in the back got forgotten -- Now everything is in one spot where I can see them and I can meal plan more efficiently.

| Stackable Can Rack Organizer (I have two racks stacked here) |

OXO POP Containers with Scoops for Snacks

Another thing that's been a huge game changer is moving dry snacks into OXO POP Food Storage Containers. We love these for our snack crackers and pretzels. They keep everything fresh and it's easy to see if you're starting to run low on these staples. To keep the kids from going too wild with serving sizes we added clear OXO 1/2 Cup Scoops in each container too - making it easy to grab a serving.
I used my Brother Label Maker to make labels for the containers. These can easily be peeled off and relabeled as needed.

| OXO POP Food Storage Containers | OXO 1/2 Cup Scoops | Brother Label Maker |

Disclaimer

This website shares personal opinions and experiences regarding a variety of topics. Please do your own research regarding all things and use information/opinions stated here at your own discretion and risk.

---

---

Check out our Related Posts:

Happy Giving Tuesday 2019! (+ Coupon Code)

Happy Giving Tuesday! Did you know we donate a percentage of profits from Birch Landing Home at year-end? So every time you place an order or visit my blog that donation gets the chance to grow. Last year I was able to donate to The American Cancer Society and Susan G. Komen.

I haven’t decided where this year’s donation is going yet so if you have a favorite charity please share! 

And this week I’m giving back to you with a Coupon Code too! Use GIVINGBACK to get 10% off your Etsy orders through 12/11/19.

DIY Vintage Pie Tin Clock

Rummaging around in my parents basement a few weeks ago, I stumbled across a stack of Vintage Table Talk Pie Tins that had been my Grandmother’s. Back in the day (approximately the 1930’s-1950’s), people would buy these store-bought pies with an extra 10 cent deposit that would be reimbursed if you returned the clean pie tin back to the store… but apparently my Grandmother chose not to, haha. These pie tins were a fun vintage find, and sentimental because they had once belonged to her. Since we didn’t have a kitchen clock I figured turning one of these tins into a clock would be a fun idea - and here’s how I did it. | This post contains affiliate links |

The first step to creating your clock is to purchase a clock kit that has the right diameter hands for your pie tin, so when they are mounted in the center of the tin they can move freely all around the face without touching the sides (very important).

After some measuring and browsing around on Amazon, I settled on this Mudder Clock Kit - I liked the style of the hands and they would fit perfectly in my particular pie tin.

Next, carefully measure to find the center of the pie tin and poke a pilot hole through with a small nail and hammer. After that, make sure your pie tin is well supported and on a safe area for drilling (I used some scrap 4x4 posts as a work station). Then carefully drill out your hole, starting with your smallest drill bit.

In order not to “rip” the tin, it’s very important to start small and work your way up in drill bit size. I started with the smallest drill bit and then worked my way up, using every-other-drill bit in the set going up in size order.

If you get a large burr, carefully cut it off with a pair of small wire cutters before you move up to your next drill bit size.

Please note: Keep in mind that these pieces of tin are SHARP so use care and be mindful of the metal shavings you may drop while drilling. Make sure to clean up the shavings well after your project is done.

Periodically check to see if the threaded clock mechanism can pass through your hole yet. For this clock kit, I needed to jump up to a larger drill set in order to finally work my way up to the size hole I needed (in this case it was a 5/16” drill bit).

Once the hole is the correct size, use a round file to clean up any little burrs around the edge.

Now it’s time to assemble your clock - follow the manufacturer’s directions on the best way to assemble the clock hands for your particular kit. Keep in mind that clock kits and especially the hands are VERY delicate so take care assembling them.

Once your clock is assembled, install the battery and set the time - now you can enjoy your new Vintage Pie Tin Clock!

---

Are you interested in making your own Vintage Pie Tin Clock but need a pie tin?

I’m selling some extra pie tins* in my Etsy shop, click the button below to shop:

*Please note the tins I have listed for sale may vary slightly in size and style from the one I made my Pie Tin Clock with.

---

Other posts you might enjoy from Birch Landing Home:

• Milk Can House Number

• How to Turn a Starbucks Bottle into a Milk Bottle Vase

• DIY Slate Garden Markers

---

---

Art Cart Solution for Kids' Craft Supplies

Our kids love arts and crafts, and at this age, they particularly love coloring and coloring books - however, the art supplies were totally taking over the house. In order to contain the chaos, I decided an “Art Cart” would be the perfect storage and organizational solution. | This post contains affiliate links |

I picked up this cart at Target, but I've linked a very similar one here from Amazon. We decided to stash the coloring books on the bottom shelf, then the tins full of stickers and art kits on the second shelf, and finally the top shelf was reserved for our Art Supply Caddy full of crayons, colored pencils, stencils, etc.

For the Art Supply Caddy, I used an inexpensive plastic caddy and made custom vinyl labels with my Cricut so that everything has a place.

Finally to store everything, the Art Cart tucks neatly into our pantry where it’s easily accessible but still out of the way. The kids can go in and help themselves to craft supplies whenever they like, and when we want to do a big project the whole thing can wheel out for even easier access. This storage hack has been a game changer in our home and I hope it does the same for you too :)

Make Sure You're Visible on Halloween

It’s so important that kids and chaperones can be seen by motorists to help avoid any accidents, so to remind everyone of this basic Halloween safety tip - make sure you can be seen and seen well while out Trick-or-Treating. | This post contains affiliate links |

Some Ways to Increase Visibility While Trick-or-Treating:

• Carry a Flashlight. Make sure everyone in your group has a flashlight so that everyone can see where they're going and others can see you better too. (It's also a good idea to remind your kids not to shine them in others eyes as you come across other trick-or-treaters.)
• LED Bracelets/Wearables. These bright, colorful, often flashing lights can really help you be seen at night - and kids think they're really fun.
• Glow Sticks. Glow Sticks and glow jewelry can be useful to help be seen at night, and kids generally love them and will wear them without a fight.
• Reflective Stickers/Patches. We put reflective stickers on our Halloween buckets (pictured above) to help make them more noticable at night. It's hard to capture it on camera, but these stickers reflect really well in low-light conditions and are super durable, even on fabrics. (For what it's worth, we put these on everything year-round - helmets, bikes, backpacks, hiking gear, coats, etc. We love them!)
• Stay Together. Having everyone in your party stay together in a group is a great way to increase visibility. When kids scatter and dart around it can be very disorientating for drivers and hard to see where everyone is. Make sure your group stays together and walks on the sidewalks or off the shoulder of the road. Also make eye contact with stopped drivers before you cross the road to ensure that they do see you.

For specific ideas about what’s recommended in your area for safe Trick-or-Treating, contact your local public safety or Police department for more ideas. Stay safe and Happy Halloween!