In our daughter's small bedroom, space is at a premium. We try hard to make the most of the space and keep the floor as open as possible to help the room feel a little bigger and give her more area to play. On one wall of her room, there is a very shallow nook I wasn't sure what to do with but wanted to make it an efficient use of space. After some thought, I decided building some custom book storage would be the perfect solution.

DIY Book Rails, Book Ledge, Storage. Kids Room / Nursery

Materials:

1x3 boards
1x2 boards
screws
wood glue
spackle
level
painters tape

How-To:

1. Cut the wood the desired length of the rail shelf. You will need two 1x3 boards and one 1x2 board for each rail.

2. Line up the boards as shown below (the wide ones on the bottom and back, and the narrow one at the front). Pre-drill, then glue the edges, and secure with wood screws.

3. Once it's dried and secure, spackle the screw holes, let dry, and then apply 3 coats of paint (I used semi-gloss trim paint).

4. Next mark the location of the studs and the approximate spacing of the book rails. I could have easily put three rails in this space but I didn't want our toddler trying to climb it like a ladder, so I decided to only do two.

Shop My Amazon Favorites

5. Center the book rails in the space and use a level to hang the book rails, pre-drilling and screwing the book rails into the wall studs.

6. Decorate and add your books! While these are pretty sturdy, I would recommend being mindful of the weight put on the rails - don't put too many books or large, heavy books on them, especially since your little one will be reaching up to pull books off and you don't want anything heavy to topple off.

And finally I decided to build a simple, sturdy narrow crate to hold our daughter's bigger, heavier books.